TC11-2023-02 Revision der GB Standards für Kraftfahrzeuge und -teile in China
25. Januar 2024Am 9. November 2023 hat die CNCA Automotive and Parts Technical Expert Group (TC11) eine technische Resolution zu den „Modification and Mandatory Certification Standards for Automobiles and Auto Parts Products“ (TC11-2023-02) veröffentlicht. Betroffene GB-Standards sind z.B. GB 15084-2022 (Motor vehicles-Device for indirect vision-Requirement of performance and installation), GB/T 4501-2023 (Laboratory test methods for truck and bus tyres capabilities).
Ein Großteil von Kraftfahrzeugteilen benötigt eine CCC-Zertifizierung, um in China für den Import und den Vertrieb zugelassen werden zu können.
Die Resolution enthält folgende Bestimmungen der zu überarbeitenden Produktnormen für die Automobilindustrie (siehe unten, Tabelle 1):
1). Neue Zertifizierungen werden gemäß den neuen Standardanforderungen (einschließlich der Anforderungen des Umsetzungsdatums) umgesetzt.
2). Wenn es für eine überarbeitete Norm keinen neuen Prüfgegenstand gibt, muss ein bereits zertifiziertes Produkt für die Erneuerung nicht extra geprüft werden, das Zertifikat kann gemäß der neuen Norm direkt aktualisiert werden.
Wenn es einen neuen Prüfgegenstand gibt, muss ein Differenztest durchgeführt werden. Die Erneuerung eines Zertifikats kann nach bestandener Prüfung ausgestellt werden.
Für zertifizierte Produkte, die vor der Einführung der neuen Norm-Version ausgeliefert, im Markt verkauft und/ oder deren Produktion eingestellt wurden, ist es nicht erforderlich, das Zertifikat gemäß der neuen Version der Norm erneut prüfen und neu ausstellen zu lassen.
3). Bereits ausgestellte CCC-Zertifikate betroffener Produkte können ab dem Datum der Veröffentlichung dieser Resolution 1 Jahr lang weiter verwendet werden.
Wenn für die Norm ein eindeutiges Datum als Übergangsfrist zur Umsetzung der Änderung und Erneuerung des Zertifikats festgelegt wurde, dann gilt diese für den Inhaber, auch wenn diese länger als 1 Jahr nach Veröffentlichung dieser Resolution beträgt.
Wenn die festgelegte Umsetzungsfrist weniger als 1 Jahr nach Veröffentlichung dieser Resolution beträgt, kann der Inhaber des Zertifikates die Änderung und Erneuerung des Zertifikates trotzdem innerhalb von 1 Jahr nach der Veröffentlichung der Resolution gemäß der entsprechenden Norm abschließen.
Unternehmen können die Erneuerung von Zertifikaten entsprechend ihrer eigenen Möglichkeiten im Voraus durchführen.
4). Nach Ablauf der festgelegten Fristen für die Aktualisierung der Normen gelten für Zertifikate die Anforderungen der „Verordnung über die Verwaltung der obligatorischen Produktzertifizierung“ der Zertifizierungsbehörde.
Die Stellungnahmen der neuen CCC-Zertifizierungsstandards sind in Tabelle 2 (s.u.) dargestellt.
Weitere Informationen darüber, wie sich die CCC-Zertifizierung, die CCC-Self-Declaration oder die freiwillige CQC und CCAP Zertifizierung auf Ihr Unternehmen auswirken könnte, oder Informationen über die CCC-Zertifizierung im Allgemeinen, befinden sich in unserem Newsbereich. Dort finden Sie zweimal pro Woche aktuelle Informationen.
Bitte zögern Sie nicht, uns für weitere Details und Beratung zu kontaktieren. Sie können uns per E-Mail oder Chat anschreiben, oder anrufen unter +49692713769150.
Sie können sich auch unsere kostenlose CCC-Broschüre ansehen, die Sie als PDF-Datei herunterladen können. (Die Broschüre enthält auch Informationen zur CCC Self-Declaration und der freiwilligen CQC- und CCAP-Zertifizierung.)
Tabelle 1: Übersicht zu den Bestimmungen der zu überarbeitenden Produktnormen
| No. | Standard number | Standard name | Previous version of the standard | Release date | Date of implementation | The new version of the standard implements the transition period requirements | Difference test is required | Certification implementation requirements |
| 1 | GB 15741-1995 | Automobile and trailer number plate plates (racks) and their location "Amendment Order No. 1". | 2023-05-23 00:00:00 | 2026-01-01 00:00:00 | For new models applying for type approval, it will be implemented from the 31st month from the date of issuance of this amendment, and a transition period will be given to models that have been type approved until they are discontinued. | For new applications, it will be implemented from January 1, 2026. For certified models, a transition period until discontinuation is given. | ||
| 2 | GB 13094-2017 | Structural Safety Requirements for Passenger Cars "No. 1 Amendment Order". | 2023-05-23 00:00:00 | 2023-07-01 00:00:00 | For new models applying for type approval, it will be implemented from the date of implementation. For models that have received type approval, a transition period is granted until production is discontinued. | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, a transition period until discontinuation is given. | ||
| 3 | GB 15084-2022 | Performance and installation requirements for indirect field devices for motor vehicles | GB 15084-2013 | 2022-12-29 00:00:00 | 2023-07-01 00:00:00 | For the new application for type approval of the vehicle, from the date of implementation of this document. For models that have obtained type approval, they will be implemented from the 13th month from the date of implementation of this document. | The traditional rearview mirror does not need to make up the difference test, and the version can be changed directly; The Automotive Camera-Monitor System (CIS) will be implemented after the announcement of the adjustment of the Supervisory Committee's catalog | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, it will be implemented from the 13th month from the date of issuance of the technical resolution. |
| 4 | GB 14023-2022 | Vehicle, Ship and Internal Combustion Engine Radio Disturbance Characteristics Limits and measurement methods used to protect receivers outside the vehicle | GB 14023-2011 | 2022-10-12 00:00:00 | 2023-11-01 00:00:00 | The test methods and limits are the same as those of GB34660-2017, and the new application models need to be tested in accordance with GB34660-2017, and are no longer required to be tested in accordance with the GB14023Certified models that have completed testing in accordance with GB14023-2011 are not required to comply with GB34660-2017. GB14023-2022. | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, a transition period until discontinuation is given. | |
| 5 | GB/T 18386.2-2022 | Energy Consumption and Range Test Methods for Electric Vehicles Part 2: Heavy Commercial Vehicles | GB/T 18386-2017 | 2022-10-14 00:00:00 | 2023-05-01 00:00:00 | If the working conditions change, the test will be re-conducted according to the standard | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, it will be implemented from the 13th month from the date of issuance of the technical resolution. | |
| 6 | GB/T 17258-2022 | Compressed natural gas cylinders for automobiles | GB/T 17258-2011 | 2022-10-14 00:00:00 | 2023-05-01 00:00:00 | Only the inspection mark and the manufacturing license number of the safety supervision department are checked | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, it will be implemented from the 13th month from the date of issuance of the technical resolution. | |
| 7 | GB/T 27996-2022 | All-terrain cranes | GB/T 27996-2011 | 2022-07-11 00:00:00 | 2023-02-01 00:00:00 | Changed, increased performance requirements;Re-test according to the corresponding clauses of the standard | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, it will be implemented from the 13th month from the date of issuance of the technical resolution. | |
| 8 | GB/T 26408-2020 | Concrete mixer truck | GB/T 26408-2011 | 2020-12-14 00:00:00 | 2021-11-01 00:00:00 | The operating noise test method and the limit value of the concrete mixer truck have not changed, and the version is changed directly | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, it will be implemented from the 13th month from the date of issuance of the technical resolution. | |
| 9 | QC/T 932-2018 | Road transport liquid dangerous cargo tank vehicle emergency shut-off valve | QC/T 932-2012 | 2018-04-30 00:00:00 | 2018-09-01 00:00:00 | If the limit value and test method change, the test shall be re-conducted according to the standard | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, it will be implemented from the 13th month from the date of issuance of the technical resolution. | |
| 10 | GB/T 3730.1-2022 | Terms and definitions for automobiles, trailers and automobiles and trains Part 1: Types | GB/T 3730. 1-2001 | 2022-12-30 00:00:00 | 2023-07-01 00:00:00 | Standard modifications: change terms and definitions, change vehicle type definitions. The new application model is defined in accordance with the new version of the standard, and the vehicle name and model name are filled. | For the new application model, it will be implemented from the date of issuance of the technical resolution. For certified models, a transition period until discontinuation is given |
Tabelle 2: Stellungnahmen der neuen CCC-Zertifizierungsstandards
| No. | Standard number | Standard name | Date of implementation | Recommended implementation requirements |
| 1 | GB/T 4501-2023 | Truck tire performance indoor test method | The applicable standard GB9743 for tires is quoted, and the whole vehicle is not included separately | |
| 2 | GB/T 4502-2023 | Indoor test method for passenger car tire performance | The applicable standard GB9744 for tires is quoted, and the whole vehicle is not included separately | |
| 3 | GB/T 17729-2023 | Air quality requirements and detection methods in long-distance buses | Dedicated school lanes are referenced with standard GB24407 and are not included separately | |
| 4 | GB/T 42612-2023 | Compressed hydrogen plastic liner for automobiles Carbon fiber fully wound gas cylinder | Not included at this time | |
| 5 | GB/T 41796-2022 | Commercial vehicle lane keeping assist system performance requirements and test methods | Not included at this time | |
| 6 | GB/T 41797-2022 | Performance requirements and test methods of driver attention monitoring system | Not included at this time | |
| 7 | GB/T 41798-2022 | Field test methods and requirements for automatic driving function of intelligent networked vehicles | Not included at this time | |
| 8 | GB/T 41871-2022 | Information security technology automotive data processing security requirements | Not included at this time | |
| 9 | GB/T 41578-2022 | Technical requirements and test methods for information security of electric vehicle charging system | Not included at this time | |
| 10 | GB/T 41601-2022 | Safety and ventilation requirements for residential vehicles | Not included at this time | |
| 11 | GB/T 29307-2022 | Reliability test method for drive motor system for electric vehicle | Not included at this time | |
| 12 | GB/T 41651-2022 | Road vehicles tow tractors with drawbar connectors installed in the front lower part and mechanical connections in the central axle hanger workshop Interchangeability | Not included at this time | |
| 13 | GB/T 41656-2022 | The towing vehicle of the road vehicle tail installation drawbar connector and the mechanical connection of the towbar hanging workshop interchangeability | Not included at this time | |
| 14 | GB/T 26778-2023 | Automobile train performance requirements and test methods | Not included | |
| 15 | GB/T 41630-2022 | Performance requirements and test methods of intelligent parking assistance system | Not included | |
| 16 | GB/Z 41599-2022 | Gross vehicle mass monitoring | Not included | |
| 17 | GB/T 40711.1-202 2 | Passenger car out-of-cycle technology/equipment energy-saving effect evaluation method Part 1: Shift reminder device | Not included | |
| 18 | GB/T 41600-2022 | Test method for straight-line driving stability of automobiles | Not included | |
| 19 | GB/T 41590.1-202 2 | Road vehicles K-line-based diagnostic communication Part 4: Physical layer | Not included | |
| 20 | GB/T 41590.2-2022 | Road vehicles K-line-based diagnostic communication Part 2;Data link layer | Not included | |
| 21 | GB/T 41590.3-2022 | Road vehicles K-line-based diagnostic communication Part 3: Application layer | Not included | |
| 22 | GB/T 41590.4-2022 | Road vehicles K-line-based diagnostic communication Part 4: Emission-related system requirements | Not included | |
| 23 | GB/T 41588.1-2022 | Road Vehicle Controller Area Network (CAN) Part 1: Data Link Layer and Physical Signaling | Not included | |
| 24 | GB/T 41588.2-2022 | Road Vehicles Controller Area Network (CAN) Part 2: High-speed media access unit | Not included | |
| 25 | GB/T 41588.3-2022 | Road Vehicle Controller Area Network (CAN) Part 3: Low-speed fault tolerance, media-dependent connection ☐ | Not included | |
| 26 | GB/T 41588.4-2022 | Road Vehicle Controller Area Network (CAN) Part 4: Time-triggered communication | Not included | |
| 27 | GB/T 41663-2022 | Road vehicle Brake lining friction material Scaled bench test method | Not included | |
| 28 | GB/T 24162-2022 | Periodic inspection and evaluation of compressed natural gas metal liner fiber ring wound gas cylinders for automobiles | Not included | |
| 29 | GB/T 23336-2022 | General technical conditions for semi-trailers | Not included | |
| 30 | GB/T 41589-2022 | On-cable control and protection device (IC-CPD) for EV mode 2 charging | Not included | |
| 31 | GB/T 40887.2-2022 | Wheelchair and Occupant Limit Systems for Accessible Coaches Part 2 Forward-facing Wheelchair Occupant Systems | Not included | |
| 32 | GB/T 25977-2022 | Snow plows | Not included | |
| 33 | GB/T 42193.1-2022 | Road Vehicles Communication of emission-related diagnostics between vehicles and external equipment Part 1: General information and definition of use cases | Not included | |
| 34 | GB/T 42193.2-2022 | Road Vehicles Communication of emission-related diagnostics between vehicles and external equipment Part 2: Guidelines for terms, definitions, abbreviations and abbreviations | Not included | |
| 35 | GB/T 42193.3-2022 | Road vehicles Communication of emission-related diagnostics between vehicles and external devices Part 3: Requirements and use of diagnostic connectors and associated circuits | Not included | |
| 36 | GB/T 42193.4-2022 | Road Vehicles Communication of emissions-related diagnostics between vehicles and external equipment Part 4: External test equipment | Not included | |
| 37 | GB/T 42193.7-2022 | Road Vehicles Communication of emissions-related diagnostics between vehicles and external devices Part 7: Datalink security | Not included | |
| 38 | GB/Z 42285-2022 | Road Vehicles A guide to the method of determining ASIL classes for electrical and electronic systems | Not included | |
| 39 | GB/T 12782-2022 | Automobile heating performance requirements and test methods | Not included | |
| 40 | GB/T 42289-2022 | General requirements for the safety of residential electrical systems for residential vehicles | Not included | |
| 41 | GB/T 13043-2022 | Passenger car finalization test procedures | Not included | |
| 42 | GB/T 4352-2022 | Fuel consumption of cargo trucks running | Not included | |
| 43 | GB/T 4353-2022 | Fuel consumption of passenger vehicles running | Not included | |
| 44 | GB/T 34590.1-2022 | Road vehicles Functional safety Part 1: Terminology | Not included | |
| 45 | GB/T 34590.2-2022 | Road vehicles Functional safety Part 2: Functional safety management | Not included | |
| 46 | GB/T 34590.3-2022 | Road Vehicles Functional Safety Part 3: Concept Phase | Not included | |
| 47 | GB/T 34590.4-2022 | Road Vehicles Functional Safety Part 4: Product Development: System Level | Not included | |
| 48 | GB/T 34590.5-2022 | Road vehicles Functional safety Part 5: Product development: the hardware level | Not included | |
| 49 | GB/T 34590.6-2022 | Road vehicles Functional safety Part 6: Product development: the software level | Not included | |
| 50 | GB/T 34590.7-2022 | Road vehicles Functional safety Part 7: production, operation, service and end-of-life | Not included | |
| 51 | GB/T 34590.8-2022 | Road Vehicles Functional Safety Part 8: Support Procedures | Not included | |
| 52 | GB/T 34590.9-2022 | Road Vehicles Functional Safety Part 9: Automotive Safety Integrity Level-Oriented and Safety-Oriented Analysis | Not included | |
| 53 | GB/T 34590.10-2022 | Road Vehicles Functional Safety Part 10: Guide | Not included | |
| 54 | GB/T 34590.11-2022 | Road Vehicles Functional Safety Part 11: Semiconductor Application Guide | Not included | |
| 55 | GB/T 42284.1-2022 | Road vehicles Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems Part 1: General provisions | Not included | |
| 56 | GB/T 42284.3-2022 | Road vehicles Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems – Part 3: Mechanical loads | Not included | |
| 57 | GB/T 42284.4-2022 | Road vehicles Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems Part 4: Climate loads | Not included | |
| 58 | GB/T 42284.5-2022 | Road vehicles Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems Part 5: Chemical loading | Not included | |
| 59 | GB/T 17346-2023 | Automobile pedal position size measurement method | Not included | |
| 60 | GB/T 42704-2023 | Box method for the determination of volatile organic compounds in textile materials for automotive interiors | Not included | |
| 61 | GB/T 42626-2023 | Regular inspection and evaluation of compressed hydrogen fiber fully wound gas cylinders for vehicles | Not included | |
| 62 | GB/T 12541-2023 | Automobile passability test method | Not included | |
| 63 | GB/T 22551-2023 | Caravan Residency Requirements | Not included | |
| 64 | GB/T 22552-2023 | Caravan Terminology | Not included | |
| 65 | GB/T 42474.1-2023 | Safety Monitoring Systems for Motor Transport of Explosive Hazardous Chemicals Part 1: General Technical Requirements | Not included | |
| 66 | GB/T 42474.2-2023 | Safety Monitoring Systems for the Transport of Explosive Hazardous Chemicals in Vehicles Part 2: On-Board Installations | Not included | |
| 67 | GB/T 42474.3-2023 | Safety Control System for Vehicle Transport of Explosive Hazardous Chemicals Part 3: Installation of on-board units | Not included | |
| 68 | GB/T 42474.4-2023 | Blast Hazardous Chemicals Vehicle Transportation Safety Monitoring System Part 4: Monitoring Client | Not included | |
| 69 | GB/T 42474.5-2023 | Safety monitoring system for the transport of explosive hazardous chemicals in vehicles Part 5: Data interface between the on-board unit and the communication center | Not included | |
| 70 | GB/T 42474.6-2023 | Explosive Hazardous Chemicals Vehicle Transportation Safety Monitoring System Part 6: Data interface between the communication center and the monitoring client | Not included | |
| 71 | GB/T 30195-2023 | Test method for impact resistance of passenger car tires Pendulum method | Not included |
